Install LEMP Server (Nginx, MariaDB, And PHP) On Fedora

Thứ bảy - 26/04/2014 23:34
LEMP is a combination of the operating system and open-source software stack. The acronym LEMP is derived from the first letters of Linux, Nginx HTTP Server, MySQL/MariaDB database, and PHP, Perl or Python. We already have shown you how to install LAMP on many platforms.

nstall Nginx

Nginx (pronounced engine-x) is a free, open-source, high-performance HTTP server and reverse proxy, as well as an IMAP/POP3 proxy server written by Igor Sysoev.

First login as root user to perform the installation:

$ su

Note: If you have installed apache or any other web servers before, remove or disable them.

# systemctl disable httpd.service # systemctl stop httpd.service

To install Nginx enter the following command in your terminal:

# yum install nginx -y

Enable Nginx service to start automatically on every reboot:

# systemctl enable nginx.service

Start Nginx service using the command:

# systemctl start nginx.service

Test Nginx

Open up your web browser and navigate to http://ip-address/ or http://localhost/. You will see a screen something like below.

Test Page for the Nginx HTTP Server on Fedora - Mozilla Firefox_001

Configure Nginx

Open the file /etc/nginx/nginx.conf in any editor:

# vi /etc/nginx/nginx.conf

Set the worker_processes (i.e No. Of CPU’s in your system). To see the no. Of CPU’s, use the command lscpu. In my case, it’s “1″. So I set this as ’1′:

worker_processes 1;

Scroll down further in this configuration file and set the server name and PHP scripts:

## The default server#server {    listen       80;    server_name  localhost;    #charset koi8-r;    #access_log  logs/host.access.log  main;    location / {        root   /usr/share/nginx/html;        index  index.html index.htm;    }    error_page  404              /404.html;    location = /404.html {        root   /usr/share/nginx/html;    }    # redirect server error pages to the static page /50x.html    #    error_page   500 502 503 504  /50x.html;    location = /50x.html {        root   /usr/share/nginx/html;    }    # proxy the PHP scripts to Apache listening on    #    #location ~ \.php$ {    #    proxy_pass;    #}    # pass the PHP scripts to FastCGI server listening on    ## Uncomment or Add the following lines    location ~ \.php$ {              root           /usr/share/nginx/html;              try_files $uri =404;              fastcgi_split_path_info ^(.+\.php)(/.+)$;              fastcgi_pass;              fastcgi_index  index.php;              fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;              include        fastcgi_params;    }    # deny access to .htaccess files, if Apache's document root    # concurs with nginx's one    #    #location ~ /\.ht {    #    deny  all;    #}}

Save and close the file. Restart Nginx service:

# systemctl restart nginx.service

Install MariaDB

MariaDB is a drop in replacement for MySQL. It is a robust, scalable and reliable SQL server that comes rich set of enhancements. The default database in Fedora 19 is MariaDB.

Install it using the following command:

# yum install mysql mysql-server -y

Enable MySQL service at boot time by following command:

# systemctl enable mysqld.service

And start MySQL service using the command:

# systemctl start mysqld.service

Set MySQL root password

By default MySQL root password is empty. So to prevent unauthorized access to MySQL, let us set a root user password:

# mysql_secure_installation 
/usr/bin/mysql_secure_installation: line 379: find_mysql_client: command not foundNOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!In order to log into MariaDB to secure it, we'll need the currentpassword for the root user.  If you've just installed MariaDB, andyou haven't set the root password yet, the password will be blank,so you should just press enter here.Enter current password for root (enter for none): OK, successfully used password, moving on...Setting the root password ensures that nobody can log into the MariaDBroot user without the proper authorization.You already have a root password set, so you can safely answer 'n'.Change the root password? [Y/n] yNew password: Re-enter new password: Password updated successfully!Reloading privilege tables.. ... Success!By default, a MariaDB installation has an anonymous user, allowing anyoneto log into MariaDB without having to have a user account created forthem.  This is intended only for testing, and to make the installationgo a bit smoother.  You should remove them before moving into aproduction environment.Remove anonymous users? [Y/n]  ... Success!Normally, root should only be allowed to connect from 'localhost'.  Thisensures that someone cannot guess at the root password from the network.Disallow root login remotely? [Y/n]  ... Success!By default, MariaDB comes with a database named 'test' that anyone canaccess.  This is also intended only for testing, and should be removedbefore moving into a production environment.Remove test database and access to it? [Y/n]  - Dropping test database...ERROR 1008 (HY000) at line 1: Can't drop database 'test'; database doesn't exist ... Failed!  Not critical, keep moving... - Removing privileges on test database... ... Success!Reloading the privilege tables will ensure that all changes made so farwill take effect immediately.Reload privilege tables now? [Y/n]  ... Success!Cleaning up...All done!  If you've completed all of the above steps, your MariaDBinstallation should now be secure.Thanks for using MariaDB!

Install PHP

PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely used open-source general purpose scripting language that is especially suited for web development and can be embedded into HTML.

Install PHP with following command:

# yum install php-fpm php-mysql php-common -y

Enable and start php-fpm service:

# systemctl enable php-fpm.service# systemctl start php-fpm.service

Configure PHP

Open up /etc/php.ini file in any editor:

# vi /etc/php.ini

Find the line cgi.fix_pathinfo, uncomment and change the value from 1 to 0 (zero):


Open up the file /etc/php-fpm.d/www.conf:

# vi /etc/php-fpm.d/www.conf 

And change the user and group values from apache to nginx:

[...]; Unix user/group of processes; Note: The user is mandatory. If the group is not set, the default user's group;       will be used.; RPM: apache Choosed to be able to access some dir as httpduser = nginx; RPM: Keep a group allowed to write in log = nginx[...]

Save and close the file. Restart php-fpm service:

# systemctl restart php-fpm.service

Test PHP

Create a sample “testphp.php” file in the Apache document root folder:

# vi /usr/share/nginx/html/testphp.php

Append the lines as shown below:


Save and close the file. Restart Nginx service:

# systemctl restart nginx.service

Navigate to  http://server-ip-address/testphp.php. It will display all the details about PHP such as version, build date and commands etc.

phpinfo() - Mozilla Firefox_002

That’s it. LEMP server has been installed, and it is ready to host your website now.

Nguồn tin:

Tổng số điểm của bài viết là: 0 trong 0 đánh giá

Click để đánh giá bài viết

  Ý kiến bạn đọc

Những tin mới hơn

Giới thiệu

Cộng đồng Fedora Việt Nam

Sứ mệnh của dự án Fedora là tập hợp, dẫn dắt các tiến bộ của phần mềm và nội dung tự do nguồn mở trong một cộng đồng hợp tác, thông qua việc: Không ngừng phấn đấu để luôn đi đầu Không ngừng tìm tòi, sáng tạo, vươn lên và truyền bá phần mềm và nội dung tự do Chia sẻ thành công với toàn thể cộng...

Đăng nhập thành viên
Hãy đăng nhập thành viên để trải nghiệm đầy đủ các tiện ích trên site
Thống kê truy cập
  • Đang truy cập52
  • Hôm nay1,607
  • Tháng hiện tại66,948
  • Tổng lượt truy cập2,292,234
Fedora Project

Fedora is always free for anyone to use, modify, and distribute. It is built and used by people across the globe who work together as a community: the Fedora Project.

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây